TAICANG ZHONGBO RAILWAY FASTENING CO., LTD.
Product Categories
(Total 12 Products for No 2 Tirafondo In Grade 4 6)
15/16X6" AREMA Normal Strength Spike for North America
North America Screw Spike, also called sleeper screw, rail screw or lag bolt, is a medium or large metal screw used to fasten a rail base plate or rail. Such spikes are always fastened into holes bored into the tie sleeper, sometimes together with imbedded plastic dowels, popularly used for rails with wooden sleepers,...
NO.2 Tirafondo in Grade 4.6 to UIC 864-1
NO.2 Tirafondo in Grade 4.6 to UIC 864-1 , also called sleeper screw, rail screw or lag bolt, is a medium or large metal screw used to fasten a rail base plate or rail. Such spikes are always fastened into holes bored into the tie sleeper, sometimes together with imbedded plastic dowels, popularly used for rails with...
No.62 rail clamp for North American market
No.62 rail clamp, also called rail clip or rail fixing clip, is a device that used to maintain the lateral position of the rail, especially crane rail,mine rail, and H-beam. but allow necessary longitudinal movement. In rail fastening system, the rail clamp secures the rail in position through mechanical lock, in the...
No.106 rail clamps to secure rail in position
No.106 rail clamps, also called rail clip or rail fixing clip, is a device that used to maintain the lateral position of the rail, especially crane rail,mine rail, and H-beam. but allow necessary longitudinal movement. In rail fastening system, the rail clamp secures the rail in position through mechanical lock, in...
15/16X6" AREMA Normal Strength Screw Spike Plain Finish
15/16X6 AREMA Normal Strength Screw Spike, also called sleeper screw, rail screw or lag bolt, is a medium or large metal screw used to fasten a rail base plate or rail. Such spikes are always fastened into holes bored into the tie sleeper, sometimes together with imbedded plastic dowels, popularly used for rails with...
No.106 rail clamps to secure crane rail
No.106 crane rail clamps also called rail clip or rail fixing clip, is a device that used to maintain the lateral position of the rail, especially crane rail,mine rail, and H-beam. but allow necessary longitudinal movement. In rail fastening system, the rail clamp secures the rail in position through mechanical lock,...
No.62 crane rail clamp for North American market
No.62 crane rail clamp also called rail clip or rail fixing clip, is a device that used to maintain the lateral position of the rail, especially crane rail,mine rail, and H-beam. but allow necessary longitudinal movement. In rail fastening system, the rail clamp secures the rail in position through mechanical lock, in...
60AS Joint bar For Railway ,also called railway fish plate or joint bar, splice bar, is a metal joints bar connected to the ends of two rails to bond them together. A quality rail joint bar can largely reduce the impact of wheels to the jointing sections of the rail tracks and increase the continuity and steadiness of...
9/16"X5-1/2" track spike for North America
North American track spike is a large nail used to secure and fasten rails in a railway system. The main function of the railroad spike is to ensure a correct gauge position.During railway transportation, the spike does not need to provide a strong vertical force, which allows the railway track more freedom of...
Fe6 double spring washers ,also called Fe6 double Rail Flat Washer,Rail Plain Washer,Flat Plain Washer,Rail Spring Washer, is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut....
60si2mn Nabla Spring Blades for Nabla fastening
We produce N60si2mn Nabla Spring Blades according to NF stanard. Nabla clip Material 60Si2MnA 60Si2CrA 55Si2Mn 38Si7 Chemical composition(%) C:0.56-0.64, C:0.56-0.64, C:0.52-0.60, C:0.35-0.42, Mn:0.60-0.90, Mn:0.40-0.70, Mn:0.60-0.90, Mn:0.50-0.80, Si:1.60-2.00, Si:1.40-1.80, Si:1.50-2.00, Si:1.50-1.80, Cr:≤0.35,...
132-136RE Arema Standard Fishplate for Railroad
136RE joint bar,also called railway fish plate or joint bar, splice bar, is a metal joints bar connected to the ends of two rails to bond them together. A quality rail joint bar can largely reduce the impact of wheels to the jointing sections of the rail tracks and increase the continuity and steadiness of the train...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
